Pull-Type Disc Mower 

The Case IH TD102 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing.

The cutterbar is designed with:

• Shock protection to minimize repair expense
  • Discs protected from internal gear damage by the drive hub
• Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
• Two end discs that co-rotate to provide a narrower swath
  • Able to adjust swath from 60 in.–95 in. (1.5 m–2.4 m)
• Left cutterbar shield is hinged for easy service access

• Overload protection is standard
• Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
• Standard tractor tire bumpers protect PTO driveline and tractor tires

Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.

Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch. The TD102 can be pulled by lighter-weight tractors, as weight is pulled versus carried on a 3-point hitch.

• Transport width is just 10 ft. 10 in. (3,300 mm) when end shields are folded
• Removable parking jack stand is stored on top of tongue assembly
• Hydraulic tongue swing cylinder powers the unit from transport to operating position
• Has a 12-in. (305-mm)-minimum cutterbar ground clearance in transport position
• Hinged right-side cutterbar shield folds up for narrow transport
• Safety tow chain standard
• Low transport height eliminates the need for implement lights