Field Cultivators 

HIGH PERFORMANCE CONSTRUCTION

ONE-WAY PIVOTING STABILIZER WHEEL

• Positive, mechanical depth control for uniform depth
• Walking tandems on the mainframe and each wing section
• Stabilizing wheels on each wing section

• Optional one-way pivot:
• Allows stabilizer wheel to pivot when it is on the outside portion of a turn
• Maintains proper depth control
• Reduces side loads on the wheel and tire
• Stop built into the stabilizer wheel:
• Prevents wheel from wobbling when operating in a straight line or on the outside of a turn

BRIDGE FRAME DESIGN

OPTIONS TO MATCH CONDITIONS

• Five-bar frame utilizes:
• 3x4 in (76x102 mm) tubing side by side
• 2x2 in (51x51 mm) tubing front to rear
• Lap welds:
• Increases strength
• Extend frame life 

The Case IH Tiger-Mate 200 can be enhanced with:

• Advanced Leveling System (ALS) harrows
• Advanced Conditioning System (ACS) harrows

These additions can be made with our without the optional Case IH Crumbler® attachment depending on soil conditions and desired outcome. Based on your soil environment and farming practices, the ideal combination of tools can be configured to:

• Properly distribute residue
• Size clods
• Firm the seed zone

CUT PATTERNS

MAXXI-POINT™ SWEEP

• The first three rows of shanks take a full cut through the soil
• The fourth and fifth rows cut out the middles
• Soil, residue and chemicals are mixed and spread uniformly across the width of the unit
• Components are mixed throughout the tillage depth
• Results in even tracking and uniform sweep wear
• Even loading on each side of the sweep prepares a level seedbed
• Promotes uniform emergence

MAXXI-GRIP™ SWEEP

UNIFORM DEPTH

The new and improved Maxxi-Grip Sweep features:

• A low crown for less groove
• A long nose for extra-long wear
• A curved edge for better cutting action
• Available in 7- and 9-in (178- and 299-mm) sweeps

Unlike look-alike models, the Tiger-Mate 200 uses a shank package that ensures the cultivator stays at a uniform depth.

• Critical to creating a level seedbed
• True 150 lbs (68 kg) of tip force
• Provides consistent holding power in extreme conditions
• Ensures penetration at higher speeds in hard ground
• Maintains uniform depth and residue flow
• Standard 14-in (356 mm) trip height
• Clears virtually every obstruction
• Compression springs
• Maintain holding force throughout the shank life
• "Clamp-style" mounts with positive stops
• Provide a level, uniform bed

1. TIGER-TINE HARROW

The Tiger-tine™ harrow uses a combination of split-the-middle indexed-tine placement, parallel linkage and three tine angle adjustments to achieve superior field performance.

• Indexed tines on four bars
• Create smooth, level fields
• Evenly distribute soil and residue
• Break clods
• Kill weeds
• Double tines on the first rank are evenly centered between sweeps
• Knock down the ridge left by shanks
• Second, third and fourth ranks split the middle prior to ranks again
• Level any remaining ridge
• Results in an effective, 20-in. (51-mm) tine spacing
• Unparalleled performance
• Handles heavy residue without bunching or allowing clumped residue to drag
• Parallel linkage and non-linked tine bars
• Allows for independent movement and flexibility
• Prevents skips and gouges when going over terraces and through draws
• Keeps the unit level from front to back and side to side
• Depth and level adjustments are eliminated for maximum productivity
• Two pins per arm adjust the tine angle and spring pressure (no tools needed)
• 5 degrees – for aggressive leveling in heavy soils with minimal residue
• 20 degrees – the standard setting for most soils and residue
• 35 degrees – for extremely heavy residue

2. COIL TINE HARROW

• Three-bar design and 15-in. (38-cm) rank
• Promotes excellent residue flow and leveling
• 16-in. (41-cm)-long, 7/16-in. (11.1-mm)-diameter double-coil tines with 1 1/2-in. (63.5-mm) effective spacing
• Tines rotate to prevent damage when backing up

3. SPIKE TOOTH HARROW

• Five-bar design and 10-in. (254-mm) rank

• Promotes excellent leveling and clod breakage

• 11-in. (279-mm)-long, 3/4-in. (19-mm)-square wide teeth with 1 1/2-in. (38-mm) effective spacing

  
  

ACS ROUND

The ACS Round is used for moderate clod sizing and seedbed firming. Its round rods:

• Crush clods
• Firm soil fines
• Leave protective larger clods on top

The unit has the same dimensions as the industry-leading Case IH Crumbler^®, only with hollow rods.

• Excellent in mellow or sandy soils
• Works best in dry to moderately wet conditions
• Can be run in wetter conditions than the Crumbler

ACS FLAT

The ACS Flat is the choice for aggressive clod sizing without firming:

• Knife-like blades cut clods and throw soil and residue

• The aggressive soil-throwing action mixes fines and clods without firming

• Speeds drying

• All down-pressure is concentrated on cutting action

• Works well in hard or high-clay soil

• Can run in wet or dry conditions

• Can be run in wetter conditions than the Crumbler^® or ACS Round

UNIQUE FEATURES

Both Case IH Advanced Conditioning System (ACS) units:

• Need no depth or level adjustments
• Two-bar coil tine harrow is indexed to the rear shank
• Effectively levels the soil and distributes residue before the baskets
• Parallel linkage eliminates depth adjustments
• Offer industry-leading down-pressure consistency throughout an entire 26-in. (66-cm) trip clearance
• Creates a uniform soil finish in the most diverse conditions
• Finishes the soil without compaction
• The spring down-pressure is adjustable for 60–80 lbs./ft. (27–36 kg/m)
• Feature no-tools tine angle adjustment
• Create an easy, customized field finish
• Include large, 14-in. (36.5-cm) baskets
  • Easily roll over obstructions
  • Open basket centers mean less basket load and plugging
  • Basket arms easily adjust up — just turn one bolt per arm if conditions are too wet