TWINEPRO KNOTTING TECHNOLOGY

Available with the LB4 XL and LB6 HD series, TwinePro knotter innovation combines redesigned needles with a new needle yoke reclaim system, offering economic and environmental benefits.

TwinePro is the new patented knotter innovation by Case IH available on Large Square balers (LB4 XL series and LB6 HD series). Mounted in a stronger frame to withstand higher plunger loads, and featuring electric knotter fans to keep the units clean, the six TwinePro knotters use a simple system to create a high-strength loop knot, allowing the operator to achieve maximum density with a wide range of twines without the risk of bales bursting.

PRODUCTIVITY & DENSITY

Unparalleled packing performance

Up to 30% stronger loop knot

TwinePro combines Deering and Loop knots in a sequence with just one cut. Once the first standard knot is tied, a second knot – the loop knot – is tied for additional bale security. Compared to a single knotter system, twine is not held during the bale formation process with the double knotter system.
Increased daily productivity through greater bale efficiency

Strain on knotter components is eliminated and less pressure is exerted on the twine. TwinePro provides maximum tying reliability and maximum twine tensile strength while ensure lower risk of exploding bales even at high bale density. Snapping twine and unrolling knots are a thing of the past.

PREVENTION OF ANIMAL FEED CONTAMINATION

Maximum safety for livestock and no environmental pollution

The elimination of twine offcuts prevents contamination of the animal feed and significantly improving forage quality. TwinePro also helps reduce the impact on the environmental since it does not deposit offcuts across the field or during transport. For every 10,000 bales produced, about 3000 m worth of twine offcuts are eliminated per season, which would otherwise be left to pollute the ground and crop.

SAVE TIME AND INCREASE PROFITABILITY

Make your work easier while reducing your costs

Thanks to the high tensile strength of the system, only 6 twine strands are needed to guarantee best bale stability even at the highest bale densities (200 kg/m3 and more).

Cost savings

TwinePro eliminates offcuts left loose on the bale and in the field. In addition, less damage is left on the twine which reduces the overall costs.
Less knotter maintenance

The system prevents knotter misties due to the twine ends (no need to jump off your tractor). You'll do far less re-baling.
Lower transport costs

Thanks to the high density of the bales, you'll be able to produce fewer bales per hectare which reduces handling requirements.

LARGE SQUARE BALERS

TwinePro available on the LB4 XL series and LB6 HD series

Choose from our two large square balers to best fit your requirements

Large Balers LB4 XL series
- 4 models - Bale dimensions 80x70 to 120x90 cm
- Minimum PTO power: 75-150 hp
- Pick-up width: 1.968 / 2.352 m
- Number of knives: 19 - 29
LEARN MORE
Large Balers LB436 HD Series
- 1 model - Bale dimensions 120x90 cm
- Minimum PTO power: 250 hp
- Pick-up width: 2.352 m
- Number of knives: 29
LEARN MORE