AFS Connect 2.0

1. 1. Log in to AFS Connect (NOTE: THIS WILL ONLY WORK IF YOUR ACCESS LEVEL IS CUSTOMER, MANAGER OR DEALER ADMINISTRATOR)
2. 2. Go to Administration > Profiles > CAN BUS
3. 3. Make a copy of the desired vehicle's default profile by clicking the button that looks like 3 sheets of paper being stacked. Give the new profile a distinctive name.
4. 4. Click the pencil icon next to the newly generated profile. This allows editing.
5. 5. Check or uncheck the parameters listed in the profile as desired. Checked parameters will be monitored by the telematics unit and reported to the portal. Unchecked ones will not. A MAX of 40 parameters can be selected at a time per unit.
6. 6. Clicking the pencil icon next to a parameter allows for editing that parameter.
7. 7. If you would like a parameter to show up on the CAN Dashboard, click the pencil next to the parameter and check the box under 'Dashboard'.

No, unfortunately the DCM300 cannot be used. The only supported modems for AFS Connect are the AM50/53 modems.

Yes, AFS Connect can be used. An NTRIP subscription is required. Contact your dealer to purchase.

A cellular RTK subscription must be purchased separately.

NTRIP connectivity is achieved by entering the NTRIP server details using a Case IH AFS Pro 700 monitor. Once the modem is configured it will stay configured.